|
| With two computer operated plasma cutting Machines we can cut
any type of material from paper thin to 3/4" thick. It runs off of a
CAD system which allows us to cut anything that can be drawn. We can
customize any cut you need in your operation. The machine also
optimizes the placement on the metal surface to minimize material
wastage. |
 |
 |
The ironworker is a compact hydraulic powered unit. It
shears, punches, bends, notches, and copes. This 2600 lb machine can
handle material up to 3/4" thick or 50 tons. It allows us to punch
1/16" to 1 1/8" holes in any material. It also has a 6' x 6' x 1/2"
angle shear. |
 |
225 ton press
brake - The 225 ton
press brake allows us to break up to 3/8" plate x 10'-0" long.
|
|
3/8" thick x 8' plate roll - The 1/2" x 8' roll allows us to roll 1/2" thick x
8' maximum plate from 10" diameter to any size.
|
|
 |
3/8" thick x 10' shear - The shear will shear any metal to 3/8"
thick x 10' long. |
|
Welding
machines - Our welding machines are set
up to weld any kind of alloy at any
thickness.
|
|
|
|
SPECIAL POINTS OF INTEREST
|
-
21,000 sq ft of
shops
-
10,000 sq ft of
Warehouse
-
Complete Metal
Forming capabilities
-
Qualified
Workers
-
Available
Laydown Area
-
Sheet
Metal and Plate Fabrication and
Installation
-
Marine,
Commercial and Large Industrial
Fabrication
-
All
Alloys
-
Competitive
Prices
|
|
|
